Giới thiệu các bài báo khoa học về kết cấu tàu thủy-List of SSC Reports

umber Title Publication
Date
SSC-001 Causes of Cleavage Fracture in Ship Plate 04/30/1946
SSC-002 Causes of Cleavage Fracture in Ship Plate Flat Plate Tests 04/30/1946
SSC-003 Cleavage Fracture of Ship Plates as Influenced by Size Effect 03/30/1946
SSC-004 Direct Explosion Test for Welded Armor and Ship Plate Prime and Welded Plate Tests 01/30/1946
SSC-005 Causes of Cleavage Fracture in Ship Plate 09/30/1946
SSC-006 Investigations of Brittle Cleavage Fracture of Welded Flat Plate By Means of a Bend Test 03/10/1948
SSC-007 Fatigue Tests of Ship Welds 07/30/1946
SSC-8 Causes of Cleavage Fracture in Ship Plate Flat Plate and Additional Tests on Large Tubes 08/30/1946
SSC-9 Correlation of Laboratory Tests With Full Scale Ship Plate Fracture Tests 09/15/1946
SSC-10 Cleavage Fracture of Ship Plates as Influenced By Size Effect 09/30/1946
SSC-11 Metallurgical Quality of Steels Used for Hull Construction 02/25/1947
SSC-12 Investigation of Means for Evaluating the Quality of Hull Plate Steel By Tests Conducted on Furnace or Ladle Samples 05/28/1947
SSC-13 Metallurgical Quality of Steels Used for Hull Construction 05/31/1947
SSC-14 Fatigue Test of Ship Welds 08/30/1947
SSC-15 Correlation of Laboratory Tests with Full Scale Ship Plate Fracture Tests: Slow Notch Bend Test 10/15/1947
SSC-16 Causes of Cleavage Fracture in Ship Plate 09/30/1947
SSC-17 Correlation of Laboratory Tests With Full Scale Ship Plate Fracture Tests: A Study of Strain Gradients 12/30/1947
SSC-18 Correlation of Laboratory Tests With Full Scale Ship Plate Fracture Tests 01/30/1948
SSC-19 Correlation of Laboratory Tests with Full Scale Ship Plate Fracture Tests: Analysis of True-Stress &Strain Data on Project Steel 02/28/1948
SSC-20 Investigation of Means for Evaluating the Quality of Hull Plate Steel by Tests Conducted on Furnace or Ladle Samples 05/15/1948
SSC-21 12 Inch Flat Plate Tests 11/30/1948
SSC-22 Correlation of Laboratory Tests with Full Scale Ship Plate Fracture Tests 09/30/1948
SSC-23 Evaluation of Improved Materials and Methods of Fabrication for Welded Steel Ships 03/30/1948
SSC-24 The Fundamental Factors Influencing the Behavior of Welded Structures Under Conditions of Multiaxial Stress, Various Temps., 08/30/1947
SSC-26 Metallurgical Quality of Steels Used for Hull Construction 11/30/1949
SSC-27 Causes of Cleavage Fracture in Ship Plate, Tests of Restrained Welded Specimens and Hatch Corner Specimens of Mild Steel 12/30/1948
SSC-28 Causes of Cleavage Fracture in Ship Plate High Yield Strength Structural Steel 11/30/1948
SSC-29 Final Report Application of the Explosion Test to Evaluate Shock Properties of High Yield Strength Steels 06/30/1949
SSC-30 Correlation of Laboratory Tests with Full Scale Ship Plate Fracture Tests 07/30/1949
SSC-31 The Effect of Cyclic Stress on the Transition Temperature of Steel 03/30/1949
SSC-32 Final Report on High Speed Rotating Disk Project at MIT 01/30/1949
SSC-33 Evaluation of Improved Materials and Methods of Fabrication for Welded Steel Ships 11/15/1949
SSC-34 The Fundamental Factors Influencing the Behavior of Welded Structures Under Conditions of Multiaxial Stress, Variations of Temps 07/30/1949
SSC-35 Aspect Ratio Program 05/30/1950
SSC-36 Evaluation of Improved Materials and Methods of Fabrication for Welded Steel Ships 07/30/1949
SSC-37 Considerations of Welded Hatch Corner Design 07/18/1951
SSC-38 A Study of Plastic Deformation and Fracturing by Strain Energy Distribution 01/30/1949
SSC-39 Welded Reinforcement of Openings in Structural Steel Members 12/30/1950
SSC-40 Evaluation of Improved Materials and Methods of Fabrication for Welded Steel Ships 11/30/1950
SSC-41 Evaluation of Improved Materials and Methods of Fabrication for Welded Steel Ships 11/30/1950
SSC-42 The Determination of Initial Stresses in Steel Plates 09/15/1958
SSC-43 Evaluation of Notch Sensitivity of Mild Steel Ship Plate 12/21/1950
SSC-44 The Effects of Width and Thickness on Strength, Energy Absorption / Transition Temperature of Internally Notch Flat Steel Plates 12/30/1950
SSC-45 Evaluation of Improved Materials and Methods of Fabrication for Welded Steel Ships 01/30/1950
SSC-46 Evaluation of Ship Welding Procedures By Direct Explosion Testing Covering Work Performed Under Dept of the Navy-Bureau of Ships 03/30/1950
SSC-47 The Strength, Energy Absorption, and Transition Temperature of Internally Notched Flat Steel Plates 08/30/1950
SSC-48 A Study on the Structural Action of Superstructures on Ships 06/30/1950
SSC-49 An Investigation of the Influence of Deoxidation and Chemical Composition on Notched-Bar Properties of Semi-Killed Ship Steel 08/30/1950
SSC-50 Welded Reinforcement of Openings in Structural Steel Members 01/30/1950
SSC-51 Cracking of Simple Structural Geometries : The Effects of Edge Notch Geometry on Flat Steel Plates 01/30/1950
SSC-52 The Low Temperature Properties of Relatively High Purity Iron-Carbon Alloys 03/30/1950
SSC-53 An Investigation on the Influence of Deoxidation and Chemical Composition on Notched-Bar Properties of Semikilled Ship Steel 02/27/1950
SSC-54 The Fundamental Factors Influencing the Behavior of Welded Structures under Conditions of Multiaxial Stress and Variety of Temps 01/30/1950
SSC-55 Welded Reinforcement of Openings In Structural Steel Members: Room and Low Temp Tests of Plates with Reinforced Openings 03/30/1951
SSC-56 Welded Reinforcement of Openings in Structural Steel Members 02/28/1950
SSC-57 Cracking of Simple Structural Geometries: Investigation of Welded Ship Details 05/30/1951
SSC-58 Low Temperature Embrittlement Mechanics Deduced From Zinc Single Crystal Fracture Studies 04/30/1951
SSC-59 Critical Stress for Slip, Twinning, and Cleavage in Single Crystals of Iron 05/30/1952
SSC-60 The Effect of Subcritical Heat Treatment on the Transition Temperature of a Low Carbon Ship Plate Steel 08/30/1952
SSC-61 The Fundamental Factors Influencing the Behavior of Welded Structures: The Effect of Subcritical Heat Treatment on Transition Te 12/30/1952
SSC-62 Past Structural Studies Related to the Ship and Ship Components and for Determining Loads and Strains on Ships at Sea 06/30/1952
SSC-63 Review of Welded Ship Faillures 09/30/1953
SSC-64 Fundamental Factors Influencing the Behavior of Welded Structures Under Multiaxial Stress / Variations of Temperatures 11/06/1953
SSC-65 A Critical Survey of Brittle Failur in Carbon Plate Steel Structures Other Than Ships 08/30/1953
SSC-66 Critical Stresses for Slip, Twinning, and Cleavage in Single Crystals of Iron 06/30/1957
SSC-67 Model Tests on Hull-Deckhouse Interaction 01/30/1952
SSC-68 Tensile Tests of Large Specimens Representing the Intersection of a Bottom Longitudinal /Transverse Bulkhead in Welded Tankers 09/30/1953
SSC-69 An Evaluation of Current Knowledge of the Mechanics of Brittle Fracture 12/30/1953
SSC-70 A Review of Ship Steel Research and Recommendations for Future Studies 03/30/1956
SSC-71 The Influence of Heat Treatment on the Notched-Bar Properties of Semikilled Steel Plate 03/15/1954
SSC-72 The Present Status of Nondestructive Test Methods Inspection of Welded Joints in Ship Structures 03/30/1956
SSC-73 Influence of Composition and Deoxidatin on the Properties of Ship Plate Steels 11/16/1953
SSC-74 Electron Microscope Techniques for Study of Fractured Surfaces of Ship Plate Steels 01/23/1959
ssc-75symp10 Developments in Technology as Applied to River Equipment 02/15/1976
ssc-75symp11 Structural Developments: Inland Waterway Towboats and Barges 02/15/1976
ssc-75symp09 The Long Ships into the Seventies 02/15/1976
ssc-75symp07 Yesterday’s Technology – Today’s Ships – Some Tanker Experience 02/15/1976
ssc-75symp06 Unusual Hull Design Requirements, Construction and Operating Experience of the SEABEE Barge Carriers 02/15/1976
ssc-75symp05 Instrumentation – The Only Way 02/15/1976
ssc-75symp04 Classification Society Experiences in Today’s Ships 02/15/1976
ssc-75symp03 Structural Considerations in the Design of the POLAR Class of Coast Guard Icebreakers 02/15/1976
ssc-75symp12 Observation of Ship Damage Over the Past Quarter Century 02/15/1976
ssc-75symp13 Dynamic Loadings Due to Waves and Ship Motions 02/15/1976
ssc-75symp14 Structural Response and Computer-Aided Design Procedures 02/15/1976
ssc-75symp08 Structural Design Criteria for the Safe and Economical Transportation of Liquified Natural Gas 02/15/1976
ssc-75symp22 Joining Technology and Quality Control 02/15/1976
ssc-75symp21 Experimental Methods in Ship Structural Evaluation 02/15/1976
ssc-75symp20 Analysis and Design Requirements 02/15/1976
ssc-75symp19 Fundamental Considerations of Fatigue, Stress-Corrosion Cracking and Fracture in Advanced Ship Structures 02/15/1976
ssc-75symp18 An Overview of Structural Integrity Technology 02/15/1976
ssc-75symp16 Fracture Mechanics, Fracture Criteria and Fracture Control for Welded Steel Ship Hulls 02/15/1976
ssc-75symp15 An Assessment of Current Shipboard Vibration Technology 02/15/1976
ssc-75symp01 Third Decade of Research Under the Ship Structure Committee 02/15/1976
SSC-75 Welded Reinforcement of Openings in Structural Steel Tension Members 03/30/1959
ssc-75symp02 Today’s Navy – Echoes of the Past – Sounds of the Future 02/15/1976
ssc-75symp17 Projected Ship Types to the Year 2000 02/15/1976
SSC-76 Investigation of Performance of Semikilled Carbon Steel ABS Class B and Rimmed Steel ABS Class A Under Direct Explosion Test 05/30/1956
SSC-77 Part I: Crack-Starter Tests of Ship Fracture and Project Steels 11/30/1959
SSC-78 Part II: Investigation of the Performance of Weldments and Prime Plate of ABS-B Steel l 08/15/1956
ssc-78symp12 Propeller and Wave-Induced Hull Structure Vibrations 12/15/1978
ssc-78symp01 State of the Art for Shipboard Vibration and Noise Control 12/15/1978
ssc-78symp02 Vibration from a Ship Owner’s Standpoint 12/15/1978
ssc-78symp03 The Considerations of Vibrations and Noise at the Preliminary and Contract Levels of Ship Design 12/15/1978
ssc-78symp04 Vibration from a Shipbuilder’s Point of View 12/15/1978
ssc-78symp06 Cost Considerations in Ship Vibration and Noise Problems 12/15/1978
ssc-78symp07 Approaches to Noise Exposure 12/15/1978
ssc-78symp16 Vibration Signature Analysis as a Preventive Maintenance Tool Aboard Ship 12/15/1978
ssc-78symp17 Systematic Experiments to Determine the Influence of Skew and Rake on Hull Vibratory Excitation Due to Transient Cavitation 12/15/1978
ssc-78symp18 Highly Skewed Propellers – Full Scale Vibration Test Results and Economic Considerations 12/15/1978
ssc-78symp14 Noise Prediction and Prevention in Ships 12/15/1978
ssc-78symp15 OSHA Noise Levels and the Marine Industry 12/15/1978
ssc-78symp05 Noise and Vibration as Viewed by a Maritime Union 12/15/1978
ssc-78symp13 Dynamic Analysis of the Afterbody of a Ship-Towards a Successful Correlation Between Analytical and Experimental Results 12/15/1978
ssc-78symp11 Computer Techniques for Use in Ship Hull Vibration Analysis and Design 12/15/1978
ssc-78symp10 Interaction and Compatibility Between Machinery and Hull from a Static and Vibratory Point of View 12/15/1978
ssc-78symp09 Calculation and Comparison of Propeller Unsteady Pressure Forces on Ships 12/15/1978
ssc-78symp08 Some Hydrodynamic Considerations of Propeller Induced Ship Vibrations 12/15/1978
SSC-79 Cracking of Simple Structural Geometries 03/30/1956
SSC-80 An Interpretive Report on the Metallurgical and Economic Aspects of Ship Steels and Their Relation to Ship Failures 08/15/1956
SSC-81 Effect of Grain Size and Carbon Content on the Low Temperature Tensile Properties of High Purity Fe-C Alloys 05/28/1954
ssc-81symp18 Fatigue Criteria for Ship Structure Details 02/15/1982
ssc-81symp14 Fracture Characteristics of Ship Steels Under Extremely High Loading Rates 02/15/1982
ssc-81symp13 Selection of Structural Materials for Extreme Loads Environments 02/15/1982
ssc-81symp12 Strength of Ship Hull Girders Under Moment, Shear and Torque 02/15/1982
ssc-81symp10 Grounding of a Membrane Tanker: Correlation Between Damage Predictions and Observations 02/15/1982
ssc-81symp11 Evaluation of Ultimate Ship Hull Strength 02/15/1982
ssc-81symp05 Combining Extreme Environmental Loads for Reliability -Based Designs 02/15/1982
ssc-81symp09 Overall Structural Response of a Ship Struck in a Collision 02/15/1982
ssc-81symp08 Structural Failure of a Small Cargo Vessel Among Rough Seas 02/15/1982
ssc-81symp04 Predicting Hull Bending Moments for Design 02/15/1982
ssc-81symp15 Some Extreme Effects of Residual Stresses in Shipbuilding 02/15/1982
ssc-81symp19 Application of Loading Predictions to Ship Structure Design: A Comparative Analysis of Methods 02/15/1982
ssc-81symp01 Extreme Loads in Navy Ship Design 02/15/1982
ssc-81symp02 The Consequences of Extreme Loadings on Ship Structures 02/15/1982
ssc-81symp03 Principles of Extreme Value Statistics and Their Application 02/15/1982
ssc-81symp06 Progress in the Development of Structural Load Criteria for Extreme Waves 02/15/1982
ssc-81symp17 Semi-Probabilistic Approach to the Design of Marine Structures 02/15/1982
ssc-81symp16 Offshore Structures-Implementations of Reliability 02/15/1982
ssc-81symp07 Fatigue Analysis Methdo for LNG Membrane Tank Details 02/15/1982
SSC-82 The Influence of Carbon and Manganese on the Properties of Semikilled Hot-Rolled Steel 01/30/1954
SSC-83 Reproducibility of Keyhole Charpy and Tear Test Data On Laboratory Heats of Semikilled Steel 06/30/1954
ssc-84symp01 A Review of Ship Structure Committee Activities from 1975-1984 02/10/1985
ssc-84symp02 A Time Domain Simulation Method for Ship Motion and Load Prediction 02/10/1985
SSC-84 An Appraisal of the Properties and Methods of Production of Laminated or Composite Ship Steel Plate 01/12/1956
SSC-86 Evaluation of Weld-Joint Flaws As Initiating Points of Brittle Fracture 09/04/1956
ssc-87symp09 A Markovian Approach to Compliant Offshore Platforms 02/10/1988
ssc-87symp08 A Reliability-Conditioned Approach for the Fatigue Design of Marine Structures 02/10/1988
ssc-87symp07 Calibration of Technical Standards for Marine Structures 02/10/1988
ssc-87symp06 Reliability and Durability Analysis of Marine Structures 02/10/1988
ssc-87symp05 AIM (Assessment, Inspection, Maintenance) and Reliability of Offshore Platforms 02/10/1988
ssc-87symp04 Probabilistic Fatigue Crack Growth Analysis of Offshore Structures with Reliability Updating Through Inspection 02/10/1988
ssc-87symp10 On the Determination of Design Wave Height 02/10/1988
ssc-87symp11 Methodologies for the Selection of Safety Factors and Safety Levels in the Design of Marine Structures 02/10/1988
ssc-87symp12 Reliability Analysis of Offshore Structures 02/10/1988
ssc-87symp13 Extreme Value Distributions of Wave Loads and Their Application to Marine Structures 02/10/1988
ssc-87symp14 Structural Safety Evaluation of Steel Jacket Platforms 02/10/1988
ssc-87symp16 A Structural System Reliability Care Study of an Eight-leg Steel Jacket Offshore Production Platform 02/10/1988
ssc-87symp17 Application of Reliability Assessment Methods to Marine Frame Structures Based on Ultimate Strength Analysis 02/10/1988
ssc-87symp18 System Reliability of Offshore Jacket Structures by Ideal Plastic Analysis 02/10/1988
SSC-87 Rapid Propagation of a Crack in a Brittle Material 03/25/1955
ssc-87symp03 Considerations of Probability-Based Fatigue Design for Marine Structures 02/10/1988
ssc-87symp02 Application of Reliability to Formulation of Fixed Offshore Design Codes 02/10/1988
ssc-87symp15 Reliability of Plates Under Combined Loading 02/10/1988
ssc-87symp01 Lessons Learnt from Structural Reliability Research and Applications in Marine Structures 02/10/1988
SSC-88 Influence of Silicon and Aluminum on the Properties of Hot-Rolled Steel 07/01/1955
SSC-89 Effect of Accelerated Cooling After Hot-Rolling On The Notched-Bar Properties of Ship Plate Sterl 10/30/1957
SSC-90 Effects of Aluminum Additions and Variations in Finishing Temperatures on Properties Hot-Rolled Experimental Open-Hearth Steels 01/30/1958
ssc-91symp13 Some Considerations Regarding Tank Inspection Priorities for Oil Tankers 12/10/1991
ssc-91symp16 Ultimate Hull Girder Strength Margins in Present Class Requirements 12/10/1991
ssc-91symp17 Ship Longitudinal Strength Modeling for Reliability Analysis 12/10/1991
ssc-91symp12 Inspection and Structural Maintenance of Chevron’s Tanker Feet 12/10/1991
ssc-91symp11 Hull Strapping of Ships 12/10/1991
ssc-91symp09 Fatigue Reliability Model for Inspection, Updating and Repair of Welded Geometries 12/10/1991
ssc-91symp39 Cost/Benefit-Based Inspections: The Inspection, Maintenance and Repair Process for Fixed Offshore Structures 12/10/1991
ssc-91symp08 The Fatigue Fracture Reliability and Maintainability Process and its Application to Marine Structures 12/10/1991
ssc-91symp10 Probability Based Cost Benefit Analysis of Fatigue Design, Inspection and Maintenace 12/10/1991
ssc-91symp07 A Survey of Some Important Research Areas Related to Marine Maintenance 12/10/1991
ssc-91symp06 Structural Maintenance for New and Existing Ships: Overview, Fatigue Cracking and Repairs 12/10/1991
ssc-91symp04 The Owners and Operators Perspective on Inspection and Maintenance 12/10/1991
ssc-91symp03 Inspection Methods and Equipment 12/10/1991
ssc-91symp02 Viewpoint of the Classification Societies 12/10/1991
ssc-91symp40 Marine Structural Safety and Economy 12/10/1991
SSC-91 Investigation of the Influence of Deoxidation and Chemical Composition on Notched-Bar Properties of Ship Plate Steels 08/30/1958
ssc-91symp01 The Underwriter’s Perspective 12/10/1991
ssc-91symp18 Regulating Marine Safety in the Arctic 12/10/1991
ssc-91symp19 Operational Response Monitoring for Ships and the Offshore 12/10/1991
ssc-91symp20 The Structural Renovation of a Liquefied Gas Carrier 12/10/1991
ssc-91symp34 Requalification and IMR Program for the Belayim Field 12/10/1991
ssc-91symp30 Comparative Fatigue Behavior of Structural Details of VLCCs 12/10/1991
ssc-91symp31 Breaking with Tradition Safety and the Survival of the US Maritime Industry 12/10/1991
ssc-91symp32 Corrosion and Safety of a Ship: Survey Report of a Long-Life Ship 12/10/1991
ssc-91symp33 Parametric Evaluation of Marine Structural Life Expectancy Using a Reliability-Based Methodology 12/10/1991
ssc-91symp35 A Graphical Database for Hull Fracture Reports 12/10/1991
ssc-91symp36 Structural Integrity Monitoring and Damage Detection by Using Pattern Recognition and Expert Systems 12/10/1991
ssc-91symp37 Ultimate Longitudinal Strength Analysis of a Double Skin Tanker by Idealized Structural Unit Method 12/10/1991
ssc-91symp29 Consideration of Global Climatology and Loading Characteristics In Fatigue Damage Assessment of Ship Structures 12/10/1991
ssc-91symp28 Future Class Requirements and Support Services for Inspection and Maintenance 12/10/1991
ssc-91symp21 The Evolution of Inspection and Repair Procedures for Ship Structures 12/10/1991
ssc-91symp22 Fitness for Purpose Using ACFM for Crack Detection and Sizing and FACTS/FADS for Analysis 12/10/1991
ssc-91symp23 CATSIR Computer Aided Tanker Structures Inspection and Repair Planning 12/10/1991
ssc-91symp15 Uncertainties in Stress Analysis of Marine Structures 12/10/1991
ssc-91symp24 An Empirical Study of an Inspection Method for Securing High Reliability of Independent Prismatic Tank Type B 12/10/1991
ssc-91symp25 Planning of Inspection and Repair for Ship Operation 12/10/1991
ssc-91symp26 Report on the Trans-Alaska Pipeline Service Tanker Structural Failure Study 12/10/1991
ssc-91symp27 A Study on Hull Structures for Ageing Ships 12/10/1991
ssc-91symp38 A Probabilistic Approach for Determining the Effect of Corrosion on the Life Expectancy of Marine Structures 12/10/1991
SSC-92 Low Temperature Embrittlement Mechanics Deduced from Zinc Single Crystal Fracture Studies 11/10/1958
ssc-93symp09 A Finite Element Assessment of the Buckling Strength Equations of Stiffened Plates 02/01/1994
SSC-93 Mechanical Properties of High Purity Fe-C Alloys At Low Temperatures 03/31/1959
ssc-93symp14 Innovative Technologies for Coast Guard Marine Inspectors 02/01/1994
ssc-93symp13 Fatigue Endurance of Welded Joints, Residual Stresses and Fatigue Improvement Treatments 02/01/1994
ssc-93symp12 Applications of Spectral Fatigue Analysis to the ARCO 190 Mdwt Tankers 02/01/1994
ssc-93symp11 Improving the Management of Human and Organization Errors (HOE) in Tanker Operations 02/01/1994
ssc-93symp10 Practical Application of a New Advanced Dynamic Based Hull Structural Strength Design and Evaluation Criteria 02/01/1994
ssc-93symp08 Underwater Inspection Reliability for Offshore Structures 02/01/1994
ssc-93symp07 A Methodology for Reliability Assessment of Ship Structures 02/01/1994
ssc-93symp06 Marine Structural Integrity Programs 02/01/1994
ssc-93symp05 Fracture Mechanics Methodology for Fracture Control in Oil Tankers 02/01/1994
ssc-93symp04 Rationally-Based Fatigue Design of Tankers 02/01/1994
ssc-93symp03 Recent Studies on the Response of Structures Subjected to Large Impact Loads 02/01/1994
ssc-93symp02 Time Variant Reliability Analysis of a Mobile Offshore Unit 02/01/1994
ssc-93symp01 Hydrodynamic Loads Prediction (including Slamming) and Relation to Structural Reliability 02/01/1994
SSC-94 Mechanical Properties of High Purity Fe-C Alloys at Low Temperature 03/31/1959
SSC-95 Thermal Stresses In Ships 10/30/1956
SSC-96 Notes on the Influence of Unfair Plating on Ship Failures By Brittle Fracture 03/15/1956
SSC-97 The Mechanism of Brittle Fracture 03/25/1955
SSC-98 Energy Release Rates During Fracturing of Perforated Plates 07/30/1955
SSC-99 Notch-Toughness Properties of ABS Ship Plate Steels 11/30/1955
SSC-100 Index of Ship Structure Committee Publications 04/30/1958
SSC-101 Improved Notch Toughness of Experimental Semi-Killed Steels Over One Inch In Thickness 08/01/1956
SSC-102 The Relation of Microstructure to the Charpy Impact and Low-Temperature Tensile Properties of Two Ship Steels 06/18/1956
SSC-103 The Tensile Yield Behavior of Ship Steel 09/28/1956
SSC-104 Development of Filmless Technique for Recording Defects in Ship Welds 02/25/1957
SSC-105 Weld Flaw Evaluation 07/29/1958
SSC-106 Mil Sampling Techniques for Quality Determination of Ship Plate Steel 01/31/1958
SSC-107 Evaluation of Weld-Joint Flaws as Initiating Points of Brittle Fracture 08/29/1958
SSC-108 Notch-Toughness Properties of Ship-Plate Steel as Evaluated by the Van Der Veen Notched Slow-Bend Test 08/31/1959
SSC-109 Brittle Fracture of Mild Steel in Tension at – 196 C 11/05/1957
SSC-110 The Investigation of Radiosotopes for the Inspection of Ship Welds 02/28/1958
SSC-111 Preliminary Studies of Brittle Fracture Propagation in Structural Steel 05/15/1958
SSC-112 Studies of Brittle Fracture Propagation in Six-Foot Wide Structural Steel Plates 09/17/1959
SSC-113 Fracture Appearance of Impact Specimens Taken From Fractured Ship Plates 06/29/1959
SSC-114 The Influence of Ferrite Banding on the Impact Properties of Mild Steel 10/06/1958
SSC-115 Brittle Fracture Initiation Tests 10/15/1958
SSC-116 Static Brittle-Fracture Initiation at Net Stress 40% of Yield 12/29/1958
SSC-117 Brittle-Fracture Tests of Steel Plates Containing Residual Compressive Strain 07/02/1959
SSC-118 Studies of the Strain Distribution in Wide Plates During Brittle Fracture Propagation 12/30/1959
SSC-119 A Replication Technique for the Study of Brittle Fracture of Ship Plate Steel By Electron Microscopy 01/11/1960
SSC-120 Where We Stand in Design With Brittle Fracture 02/23/1960
SSC-121 Manual of Isotope Radiography 05/23/1960
SSC-122 Behavior of Riveted and Welded Crack Arrestors 08/31/1960
SSC-123 An Interpretation of Lower Yield Point Plastic Flow In the Dynamic Testing of Mild Steel 06/26/1961
SSC-124 A Long-Range Research Program In Ship Structural Design 11/30/1959
SSC-125 Some Observations on the Brittle Fracture Problem 07/31/1959
SSC-126 Influence of Hot-Rolling Conditions on Brittle Fracture in Steel Plate 11/10/1960
SSC-127 Influence of Speed of Deformation on Strength Properties in the Post Lower Yield Stress-Strain Curve of Mild Steel 12/09/1960
SSC-128 Influence of Steel-Making Variables on Notch Toughness 06/05/1960
SSC-129 A Numerical Solution for the Transient Strain Distribution In A Rectangular Plate With A Propagating Crack 09/05/1961
SSC-130 Studies of Brittle-Fracture Propagation in Six-Foot-Wide Steel Plates With A Residual Strain Field 04/03/1961
SSC-131 Brittle-Fracture Propagation in Wide Steel Plates 10/03/1961
SSC-132 The Feasibility of X-Ray Inspection of Welds Using Back Scattered Radiation 07/28/1961
SSC-133 Effect of Substructure on Cleavage in Iron Crystals 01/29/1962
SSC-135 Size Effect in Brittle Fracture of Notched Steel Plates in Tension 11/24/1961
SSC-136 On Various Problems of Immediate Interest to a Ship Classification Man 08/01/1961
SSC-137 Low-Cycle Fatigue of Metals – Literature Review 10/31/1961
SSC-138 The Influence of Mechanical Fibering on Brittle Fracture in Hot-Rolled Steel Plate 12/01/1961
SSC-139 On Effects of Carbon and Manganese Content and of Grain Size on Dynamic Strength Properties of Mild Steel 12/27/1961
SSC-140 A Naval Architect’s Reflections on Some Research Problems With Ship Steel 08/04/1961
SSC-141 Mill Sampling Techniques for Quality Determination of Ship Steel Plate 02/28/1962
SSC-142 Investigation of the Notch-Toughness Properties of ABS Ship Plate Steels 10/01/1962
SSC-143 Crack Propagation in Low-Cycle Fatigue of Mild Steel 05/01/1963
SSC-144 Mechanical Properties of High-Manganese Semikilled Steel Plate 01/02/1963
SSC-145 The Effect of Metallurgical Variables in Ship-Plate Steels on the Transition Temperatures in the Drop-Weight and Charpy V-Notch 12/03/1962
SSC-147 A Study of Brittle Fracture Initiation in Mild Steel 07/15/1963
SSC-148 Brittle Fracture Propagation Studies 08/20/1963
SSC-149 Summary of Some Studies of Brittle-Fracture Propagation 09/04/1963
SSC-150 An Unmanned System for Recording Stresses and Accelerations on Ships at Sea 06/03/1963
SSC-151 Low-Cycle Fatigue Behavior of Axially Loaded Specimens of Mild Steel 06/24/1963
SSC-152 Temperature Distribution and Thermal Stresses 06/30/1964
SSC-153 Preliminary Analysis of Bending-Moment Data from Ships at Sea 12/27/1963
SSC-154 Columbium as a Micro-Alloying Element in Steels and its Effect on Welding Technology 08/30/1963
SSC-155 An Investigation of Midship Bending Moments Experienced in Extreme Regular Waves by Models of the Mariner Type and Three Variant 01/15/1964
SSC-156 An Investigation of Midship Bending Moments Experienced in Extreme Regular Waves By Models of a Tanker and a Destroyer 02/03/1964
SSC-157 Summary of Investigation of Midship Bending Moments Experienced by Models in Extreme Regular Wavaes 12/18/1963
SSC-158 Low-Stress Brittle Fracture in Mild Steel 08/30/1963
SSC-159 Acquidsition and Analysis of Acceleration Data 02/17/1964
SSC-160 Geometric Effects of Plate Thickness 02/07/1964
SSC-161 Micromechanisms of Cleavage Fracture in Polycrystalline Iron 05/30/1964
SSC-162 Exhaustion of Ductility and Brittle Fracture of E-Steel Caused By Prestrain and Aging 07/30/1964
SSC-163 Investigation of Bending Moments Within the Midship Half Length of a Mariner Model in Extreme Waves 06/30/1964
SSC-164 Results from Full-Scale Measurements of Midship Bending Stresses on Two C4-S-B5 Dry-Cargo Ships Operating in North Atlantic 09/30/1964
SSC-165 Local Yielding and Extension of a Crack Under Plane Stress 12/30/1964
SSC-166 Reversed – Bend Tests of ABS-C Steel With As-Rolled and Machined Surfaces 04/30/1965
SSC-167 Restoration of Ductility of Hot or Cold Strained ABS-B Steel by Heat Treatment at 700 to 1150 F 04/30/1965
SSC-168 Rolling History in Relation to the Toughness of Ship Plate 05/30/1965
SSC-169 Interpretataive Report on Weld-Metal Toughness 07/30/1965
SSC-170 Studies of Some Brittle Fracture Concepts 09/30/1965
SSC-171 Micro- and Macro Crack Formation 10/30/1965
SSC-172 Crack Extension and Propagation Under Plane Stress 03/30/1966
SSC-173 Exhaustion of Ductility Under Notch Constraint Following Uniform Prestraining 08/30/1966
SSC-174 Investigation of Residual Stresses in Steel Weldments 09/30/1966
SSC-175 Mechanical Properties of a High-Manganese, Low-Carbon Steel for Welded Heavy-Section Ship Plate 08/30/1966
SSC-176 Biennial Report of the Ship Structure Committee 06/01/1966
SSC-177 Guide for Interpretation of Non-Destructive Tests of Welds in Ship Hull Structures 09/30/1966
SSC-178 A Survey of Some Recent British Work on the Behaviour of Warship Structures 11/30/1966
SSC-179 Residual Strains and Displacements Within the Plastic Zone Ahead of a Crack 11/30/1966
SSC-180 Experimental Determination of Plastic Constraint Ahead of a Sharp Crack Under Plane-Strain Conditions 12/30/1966
SSC-181 Results from Full-Scale Measurements of Midship Bending Stresses on two Dry-Cargo Ships – Report #2 03/30/1967
SSC-182 Twenty Years of Research Under the Ship Structure Committee 12/30/1967
SSC-183 Metallurgical Structure and the Brittle Behavior of Steel 05/30/1968
SSC-184 Exhaustion of Ductility in Compressed Bars with Holes 06/30/1968
SSC-185 Effect of Surface Condition on the Exhaustion of Ductility by Cold or Hot Straining 07/30/1968
SSC-186 The Effect of Ship Stiffness Upon the Structural Response of a Cargo Ship to an Impulsive Load 09/30/1968
SSC-187 Biennial Report of the Ship Structure Committee 06/30/1968
SSC-188 Effect of Repeated Loads on the Low Temperature Fracture Behavior of Notched and Welded Plates 10/30/1968
SSC-189 The Video Tape Recording of Ultrasonic Test Information 10/30/1968
SSC-190 Bending Moment Distribution in a Mariner Cargo Ship Model in Regular and Irregular Waves of Extreme Steepness 11/30/1968
SSC-191 Plastic Flow in the Locale on Notches and Cracks in Fe-3Si Steel Under Conditions Approaching Plane Strain 01/30/1970
SSC-192 Notch Brittleness After Prestraining 01/30/1969
SSC-193 Development of Mathematical Models for Describing Ship Structural Response in Waves 01/30/1969
SSC-194 Feasibility Study of Model Tests on Ship Hull Girders 05/30/1969
SSC-195 Recommended Emergency Welding Procedure for Temporary Repairs 05/30/1969
SSC-196 Analysis and Interpretation of Full-Scale Data on Midship Bending Stresses of Dry Cargo Ships 06/30/1969
SSC-197 An Investigation of the Utility of Computer Simulation to Predict Ship Structural Response in Waves 06/30/1969
SSC-198 Flame Straightening and Its Effect on Base Metal Properties 08/30/1969
SSC-199 Study of the Factors Which Affect the Adequacy of High-Strength Low-Alloy Steel Weldments for Cargo Ship Hulls 08/30/1969
SSC-200 Index of Ship Structure Committee Publications 01/30/1969
SSC-201 Midship Wave Bending Moments in a Model of the Cargo Ship “Wolverine State” Running at Oblique Headings in Regular Waves 09/30/1969
SSC-202 Midship Wave Bending Moments in a Model of the Mariner-Class Cargo Ship “California Bear” Running at Oblique Headings in Waves 11/30/1969
SSC-203 Annual Report to the Ship Structure Committee 7/1/68 – 6/30/69 11/30/1969
SSC-204 Simulated Performance Testing for Ship Structure Components 09/30/1970
SSC-205 Structural Design Review of Long, Cylindrical, Liquid-Filled Independent Cargo Tank-Barges 03/30/1970
SSC-206 Permissible Stresses and Their Limitations 09/30/1970
SSC-207 Effect of Flame and Mechanical Straightening on Material Properties of Weldments 09/30/1970
SSC-208 Slamming of Ships: A Critical Review of the Current State of Knowledge 03/30/1970
SSC-209 Results From Full-Scale Measurements of Midship Bending Stresses on Three Dry Cargo Ships 07/30/1970
SSC-210 Analysis of Slamming Data from the S.S. Wolverine States 06/30/1970
SSC-211 Design and Installation of a Ship Response Instrumentation System Aboard the Container Vessel S.S. Boston 12/13/1968
SSC-212 Ship Rseponse Results from the First Operational Season Aboard the Container Vessel S.S. Boston 05/30/1970
SSC-213 A Guide for Ultrasonic Testing and Evaluation of Weld Flaws 04/30/1970
SSC-214 Ship Response Instrumentation Aboard the S.S. Boston: Results from Two Operational Seasons in North Atlantic Service 03/30/1970
SSC-215 A Guide for the Synthesis of Ship Structures Part One The Midship Hold of a Transversely-Framed Dry Cargo Ship 02/28/1970
SSC-216 Program “Tranship” A Computer Program for the Design of the Midship Section of a Transversely-Framed Dry Cargo Ship Part Two 01/30/1971
SSC-217 Compressive Strength of Ship Hull Girders Part I Unstiffened Plates 01/30/1970
SSC-218 Design Considerations for Aluminum Hull Structures Study of Aluminum Bulk Carrier 01/30/1971
SSC-219 Crack Propagation and Arrest In Ship and Other Steels 01/30/1971
SSC-220 A Limited Survey of Ship Structural Damage 03/30/1971
SSC-221 Response of the Delta Test to Specimen Variables 03/30/1971
SSC-222 Catamarans-Technological Limits to Size and Appraisal of Structural Design Information and Procedures 03/30/1971
SSC-223 Compressive Strength of Ship Hull Girders Part II Stiffened Plates 05/30/1971
SSC-224 Feasibility Study of Glass Reinforced Plastic Cargo Ship 03/30/1971
SSC-225 Structural Analysis of Longitudinally Framed Ships 01/30/1972
SSC-226 Tanker Longitudinal Strength Analysis User’s Manual and Computer Program 01/30/1972
SSC-227 Tanker Transverse Strength Analysis User’s Manual 03/30/1972
SSC-228 Tanker Transverse Strength Analysis Programmer’s Manual 03/30/1972
SSC-229 Evaluation and Verification of Computer Calculations of Wave-Induced Ship Structural Loads 06/30/1972
SSC-230 Program Scores – Ship Structural Response in Waves 08/30/1972
SSC-231 Further Studies of Computer Simulation of Slamming and Other Wave-Induced Vibratory Structural Loadings on Ships in Waves 09/30/1972
SSC-232 Study of the Factors Which Affect the Adequacy of High-Strength, Low-Alloy Steel Weldments for Cargo Ship Hulls 09/30/1972
SSC-233 Correlation of Model and Full-Scale Results in Predicting Wave Bending Moment Trends 10/30/1972
SSC-234 Evaluation of Methods for Extrapolation of Ship Bending Stress Data 10/30/1972
SSC-235 Effect of Temperature and Strain Upon Ship Steels 01/30/1973
SSC-236 A Method for Digitizing, Preparing and Using Library Tapes of Ship Stress and Environment Data 04/30/1973
SSC-237 Computer Programs for the Digitizing and Using of Library Tapes of Ship Stress and Environment Data 03/30/1973
SSC-238 Design and Installation of a Ship Response Instrumentation System Aboard the SL-7 Class Containership S.S. Sea-Land McLean 07/30/1973
SSC-239 Wave Loads in a Model of the SL-7 Containership Running at Oblique Headings in Regular Waves 09/30/1973
SSC-240 Load Criteria for Ship Structural Design 04/30/1973
SSC-241 Thermoelastic Model Studies of Cryogenic Tanker Structures 10/30/1973
SSC-242 Fast Fracture Resistance and Crack Arrest in Structural Steels 12/30/1973
SSC-243 Structural Analysis of SL-7 Containership Under Combined Loading of Vertical, Lateral and Torsional Moments Using Finite Element 01/30/1974
SSC-244 Fracture-Control Guidelines for Welded Steel Ship Hulls 03/30/1974
SSC-245 Interpretation of Nondestructive Tests of Ordinary, Medium, & High Strength, Low-Alloy Steel Weldments in Hull Structures 01/30/1977
SSC-246 Theoretical Estimates of Wave Loads on the SL-7 Container Ship in Regular and Irregular Seas 03/30/1974
SSC-247 Flame Straightening Quenched-And-Tempered Steels in Ship Construction 12/30/1973
SSC-248 Fracture Toughness Characterization of Shipbuilding Steels 06/30/1974
SSC-249 Ship Vibration Prediction Methods and Evaluation of Influence of Hull Stiffness Variation on Vibratory Response 08/30/1974
SSC-250 Bibliography for Ship-Vibration Prediction Methods and Evaluation of Influence of Hull-Stiffness Variation on Vibratory Response 07/30/1974
SSC-251 A Study of Subcritical Crack Growth in Ship Steels 01/30/1975
SSC-252 Third Decade of Research Under the Ship Structure Committee 01/30/1976
SSC-253 A GUIDE FOR THE NONDESTRUCTIVE TESTING OF NON-BUTT WELDS IN COMMERCIAL SHIPS 08/30/1976
SSC-254 A GUIDE FOR THENONDESTRUCTIVE TESTING OF NON-BUTT WELDS IN COMMERCIAL SHIPS PART TWO 04/30/1976
SSC-255 FURTHER ANALYSIS OF SLAMMING DATA FROM THE S.S. WOLVERINE STATE 07/30/1976
SSC-256 DYNAMIC CRACK PROPAGATION AND ARREST IN STRUCTURAL STEELS 01/30/1976
SSC-257 SL-7 Instrumentation Program Background and Research Plan 03/30/1976
SSC-258 A Study to Obtaion Verification of Liquid Natural Gas (LNG) Tank Loading Criteria 05/30/1976
SSC-259 Verification of the Rigid Vinyl Modeling Technique: The SL-7 Structure 01/30/1976
SSC-260 A Survey of Fastening Techniques for Shipbuilding 03/30/1976
SSC-261 Preventing Delayed Cracks in Ship Welds 07/30/1976
SSC-262 Preventing Delayed Cracks in Ship Welds Part II 08/30/1976
SSC-263 Static Structural Calibration of Ship Response Instrumentation System Aboard the Sea-Land McLean 08/30/1976
SSC-264 First Season Results from Ship Response Instrumentation Aboard the SL-7 Class Containership S.S. Sea-Land McLean 08/30/1976
SSC-265 A Study of Ship Hull Crack Arrester Systems 03/30/1976
SSC-266 Review of Ship Structural Details 01/30/1977
SSC-267 Comprehensive Strength of Ship Hull Girders Part III Theory and Additional Experiments 01/30/1977
SSC-268 Environmental Wave Data For Determining Hull Structural Loadings 03/30/1977
SSC-269 Structural Tests of SL-7 Ship Model 03/30/1977
SSC-270 Gross Panel Strength Under Combined Loading 04/30/1977
SSC-271 A Correlation Study of SL-7 Containership Loads and Motions – Model Tests and Computer Simulation 05/30/1977
SSC-272 In-Service Performance of Structural Details 01/30/1978
SSC-273 Survey of Structural Tolerances in the United States Commercial Shipbuilding Industry 01/30/1978
SSC-274 Development of an Instrumentation Package to Record Full-Scale Ship Slam Data 05/30/1978
SSC-275 The Effect of Strain Rate on the Toughness of Ship Steels 07/30/1978
SSC-276 Fracture Behavior Characterization of Ship Steels and Weldments 08/30/1978
SSC-277 Original Radar and Standard Tucker Wavemeter SL-7 Containership Data Reduction and Correlation Sample 09/30/1978
SSC-278 Wavemeter Data Reduction Method and Initial Data for the SL-7 Containership 09/30/1978
SSC-279 Modified Radar and Standard Tucker Wavemeter SL-7 Containership Data 09/30/1978
SSC-280 Results and Evaluation of the SL-7 Containership Radar and Tucker Wavemeter Data 03/30/1978
SSC-281 Bibliography For the Study of Propeller-Induced Vibration in Hull Structural Elements 08/30/1978
SSC-282 Comparison of Stresses Calculated Using the DAISY System to Those Measured on the SL-7 Containership Program 01/30/1979
SSC-283 A Literature Survey on the Collision and Grounding Protection of Ships 08/30/1978
SSC-284 Critical Evaluation of Low-Energy Ship Collision Damage Theories and Design Methodologies Vol. I 07/30/1978
SSC-285 Critical Evaluation of Low-Energy Collision Damage Theories and Design Methodologies Vol. II 07/30/1978
SSC-286 Results of the First Five “Data Years” of Extreme Stress Scratch Gauge Data Collected Aboard SeaLand’s SL-7’s 03/30/1979
SSC-287 Examination of Service and Stress Data of Three Ships for Development of Hull Girder Load Criteria 04/30/1979
SSC-288 The Effects of Varying Ship Hull Proportions and Hull Materials on Hull Flexibility, Bending and Vibratory Stresses 04/30/1979
SSC-289 A Method for Economic Trade-Offs of Alternate Ship Structural Materials 09/30/1979
SSC-290 Significance and Control of Lamellar Tearing Of Steel Plate in The Shipbuilding Industry 05/30/1979
SSC-291 A Design Procedure for Minimizing Propeller-Induced Vibration in Hull Structural Elements 09/30/1979
SSC-292 Report on Ship Vibration Symposium ’78 09/30/1979
SSC-293 Underwater Nondestructive Testing of Ship Hull Welds 09/30/1979
SSC-294 Further Survey of In-Service Performance of Structural Details 05/30/1979
SSC-295 Nondestructive Inspection of Longitudinal Stiffener Butt Welds in Commercial Vessels 02/28/1980
SSC-296 Review of Fillet Weld Strength Parameters for Shipbuilding 02/28/1980
SSC-297 Evaluation of Liquid Dynamic Loads in Slack LNG Cargo Tanks 05/30/1980
SSC-298 Investigation of Steels for Improved Weldability in Ship Construction Phase I 05/30/1980
SSC-299 Ultimate Strength of a Ship’s Hull Girder Plastic and Buckling Modes 06/30/1980
SSC-300 Summary of Nondestructive Inspection Standards for Heavy Section Castings, Forgings, and Weldments 12/30/1980
SSC-301 Probabilistic Structural Analysis of Ship Hull Longitudinal Strength 12/30/1980
SSC-302 Computer-Aided Preliminary Ship Structural Design 02/27/1981
SSC-303 Fatigue and Fracture Toughness Characterization of SAW and SMA A537 Class I Ship Steel Weldements 12/30/1981
SSC-304 SL-7 Extreme Stress Data Collection and Reduction 06/01/1981
SSC-305 Investigation of Steels for Improved Weldability In Ship Construction – Phase II 09/30/1981
SSC-306 Experimental Program for the Determination of Hull Structural Damping Coefficients 09/30/1981
SSC-307 Evaluation of Fracture Criteria for Ship Steels and Weldments 02/28/1981
SSC-308 Criteria for Hull-Machinery Rigidity Compatibility 05/30/1981
SSC-309 A Rational Basis for the Selection of Ice Strengthening Criteria for Ships Vol. 1 02/15/1981
SSC-310 A Rational Basis for the Selection of Ice Strengthening Criteria for Ships Vol. 2 Appendices 07/11/1980
SSC-311 Evaluation of SL-7 Scratch Gauge Data 08/30/1981
SSC-312 Investigation of Internal Corrosion and Corrosion-Control Alternatives in Commercial Tankships 07/30/1981
SSC-313 SL-7 Research Program Summary, Conclusions and Recommendations 08/30/1981
SSC-314 Pressure Distribution on Models of the SL-7 Containership and S.J. Cort in Waves 01/30/1982
SSC-315 Fatigue Considerations in View of Measured Load Spectra 01/30/1982
SSC-316 Ship Structure Committee Long-Range Research Plan-Guidelines for Program Development 09/30/1982
SSC-317 Determination of Strain Rates in Ship Hull Structures: A Feasibility Study 09/30/1982
SSC-318 Fatigue Characterization of Fabricated Ship Details for Design 08/30/1982
SSC-319 Development of a Plan to Obtain In-Service Still Water Bending Moment Information for Statistical Characterization 10/30/1982
SSC-320 A Study of Extreme Waves and Their Effects on Ship Structure 12/30/1983
SSC-321 Survey of Experience Using Reinforced Concrete In Floating Marine Structures 12/30/1983
SSC-322 Analysis and Assessment of Major Uncertainties Associated with Ship Hull Ultimate Failure 06/30/1983
SSC-323 Updating of Fillet Weld Strength Parameters for Commercial Shipbuilding 04/30/1983
SSC-324 Analytical Technqiues for Prediction Grounded Ship Responses 09/30/1983
SSC-325 Correlation of Tehoretical and Measured Hydrodynamic Pressures for the SL-7 Containership and the S.J. Cort (Bulk Carrier) 09/30/1983
SSC-326 Long-Term Corrosion Fatigue of Welded Marine Steels 09/30/1984
SSC-327 Investigation of Steels for Improved Weldability in Ship Construction 05/30/1984
SSC-328 Fracture Control for Fixed Offshore Structures 12/30/1984
SSC-329 Ice Loads and Ship Response to Ice 12/30/1984
SSC-330 Practical Guide for Shipboard Vibration Control and Attenuation 03/30/1984
SSC-331 Design Guide for Ship Structural Details 07/30/1985
SSC-332 Guide for Ship Structural Inspection 12/30/1985
SSC-333 A Time Domain Simulation Method for Ship Motion and Load Prediction 02/28/1985
SSC-334 Study to Determine the Influence of Weld Porosity on the Integrity of Marine Structures 02/28/1989
SSC-335 Performance of Underwater Weldments 09/30/1986
SSC-336 Liquid Sloshing in Cargo Tanks 11/30/1986
SSC-337 Ship Fracture Mechanism – A Non-Expert’s Guide for Inspecting and Determining the Causes of Significant Ship Fractures 09/30/1987
SSC-337-I Ship Fracture Mechanisms Investigation 09/30/1987
SSC-338 Fatigue Prediction Analysis Validation From SL-7 Hatch Corner Strain Data 12/30/1985
SSC-339 Ice Loads and Ship Response to Ice – A Second Season 08/30/1990
SSC-340 Ice Loads and Ship Response to Ice – Consolidation Report 09/30/1990
SSC-341 Global Ice Forces and Ship Response to Ice 08/30/1990
SSC-342 Global Ice Forces and Ship Response to Ice – Analysis of Ice Ramming Forces 08/30/1990
SSC-343 Global Ice Forces and Ship Response to Ice – A Second Season 08/30/1990
SSC-344 Development of an Onboard Strain Recorder 10/30/1987
SSC-345 Elastic-Plastic Fracture Mechanics – Marine Structural Applications 04/30/1990
SSC-345B Elastic – Plastic Fracture Mechanics Marine Structural Applications 04/30/1990
SSC-346 Fatigue Characterization of Fabricated Ship Details for Design Phase II 05/30/1988
SSC-347 Strategies for Nonlinear Analysis of Marine Structures 08/30/1988
SSC-348 Corrosion Experience Data Requirements 12/30/1988
SSC-349 Development of a Generalized Onboard Response Monitoring System 05/30/1987
SSC-350 Ship Vibration Design Guide 07/30/1989
SSC-351 An Introduction to Structural Reliability Theory 01/30/1989
SSC-352 Marine Structural Steel Toughness Data Bank Vol. 1 08/31/1990
SSC-352B Marine Structural Steel Toughness Databank (Volume 2) 08/31/1990
SSC-352C Marine Structural Steel Toughness Databank (Volume 3) 08/31/1990
SSC-352E Marine Structural Steel Toughness Databank (Abridged) 08/31/1990
SSC-352D Marine Structural Steel Toughness Databank (Volume 4) 08/31/1990
SSC-353 Analysis of Wave Characteristics in Extreme Seas 08/30/1989
SSC-354 Structural Redundancy for Continuous and Discrete Systems 12/30/1991
SSC-355 Relation of Inspection Findings to Fatigu Reliability 11/30/1989
SSC-356 Fatigue Performance Under Multi-Axial Loading In Marine Structures 01/30/1990
SSC-357 Carbon Equivalence and Weldability of Microalloyed Steels 10/25/1989
SSC-358 Influence of Prior Damage by Cyclic Loading Below the Yield Strength on Ship Steels in Marine Environments 08/30/1987
SSC-359 Hydrodynamic Hull Damping (Phase I) 06/30/1987
SSC-360 Marine Composites – Investigation of Fiberglass Reinforced Plastics in Marine Structures 06/30/1990
SSC-361 Hull Strapping of Ships 10/30/1990
SSC-362 Shipboard Wave Height Sensor 11/30/1990
SSC-363 Uncertainties in Stress Analyses on Marine Structures 04/30/1991
SSC-364 Inelastic Deformation of Plate Panels 01/30/1991
SSC-365 Marine Structural Integrity Programs (MSIP) 10/30/1991
SSC-366 Threshold Corrosion Fatigue of Welded Shipbuilding Steels 01/30/1992
SSC-367 Fatigue Design Procedures 06/30/1992
SSC-368 Probability-Based Ship Design (Phase I) A Demonstration 09/30/1992
SSC-369 Reduction of S-N Curves for Ship Structural Details 09/30/1992
SSC-370 Underwater Repair Procedures for Ship Hulls (Fatigue and Ductility of Underwater Wet Welds) 05/30/1993
SSC-371 Establishment of a Uniform Format for Data Reporting of Structural Material Properties for Reliability Analysis 06/30/1993
SSC-372 Maintenance of Marine Structures; A State of the Art Summary 05/30/1993
SSC-373 Probability-Based Ship Design Loads and Load Combinations 11/30/1993
SSC-374 Effect of High Strength Steels on Strength Considerations of Design and Construction Details of Ships 03/30/1994
SSC-375 Uncertainty in Strength Models for Marine Structures 07/24/1994
SSC-376 Ice Load Impact Study on the National Science Foundation’s Research Vessel Nathaniel B. Palmer 05/30/1995
SSC-377 Hull Structural Concepts for Improved Producibility – Tankers 12/15/1994
SSC-378 The Role of Human Error in Design, Construction, and Reliability of Marine Structures 10/30/1994
SSC-379 Improved Ship Hull Structural Details Relative to Fatigue 09/06/1994
SSC-380 Ship Structural Integrity Information System 09/30/1994
SSC-381 Residual Strength of Damaged Marine Structures 09/30/1994
SSC-382 Re-Examination of Design Criteria for Stiffened Plate Panels 06/30/1994
SSC-383 Optimum Weld-Metal Strength for High-Strength Steel Structures 07/30/1995
SSC-384 Post-Yield Buckling of Icebreaking Ship Structural Members 02/28/1994
SSC-385-I Hydrodynamic Impact on Displacement Ship Hulls – Bibliography 01/02/1996
SSC-385 Hydrodynamic Impact Loading on Displacement Ship Hulls 04/15/1995
SSC-386-IV Design and Maintenance Procedures & Advancements in Tankship Internal Structural Inspections Techniques 09/30/1992
SSC-386-II Structural Maintenance Project Vol. 2 Corrosion Damage Evaluation 12/30/1993
SSC-386-III Structural Maintenance Project Volume 3 RMS Repair Management System 09/30/1992
SSC-386-I Structural Maintenance Project Vol.1 Fatigue Damage Evaluation 10/27/1995
SSC-387 Guidelines for Evaluation of Ship Structural Finite Element Analysis 12/30/1995
SSC-388 Ship Structural Integrity Information System (SSIIS) Phase II 10/30/1995
SSC-389 Inspection of Marine Structures 02/28/1996
SSC-390 Corrosion Control of Inter-Hull Spaces 01/30/1996
SSC-391 Evaluation of Marine Structures Education in North America 06/21/1996
SSC-392 Probability Based Ship Design: Implementation of Design Guidelines 10/21/1996
SSC-393 Evaluation of Ductile Fracture Models for Ship Structural Details 01/08/1997
SSC-394 Residual Strength Assessment of Pitted Plate Panels 01/08/1997
SSC-395-IV SMP Vol. 4 Fatigue Classification of Critical Structural Details in Tankers 02/27/1997
SSC-395-I Ship’s Maintenance Project, Part II and III – Vol. 1 Rational Basis for Corrosion Limits on Tankers 02/27/1997
SSC-395-V SMP Vol. 5 Fitness for Purpose Evaluation of Critical Structural Details in Tankers 02/27/1997
SSC-395-III SMP Vol. 3 Repair Management System for Critical Structural Details in Ships 02/27/1997
SSC-395-II SMP Vol. 2 – Study of Fatigue of Proposed Critical Structural Details in Double Hull Tankers 02/27/1997
SSC-396 Optimized Design Parameters for Welded TMCP Steels 02/27/1997
SSC-397 Commercial Ship Design and Fabrication for Corrosion Control 02/27/1997
SSC-398 Assessment of Reliability of Existing Ship Structures 04/30/1997
SSC-399 Strength and Stability Testing of Stiffened Plate Components 04/23/1997
SSC-400 Weld Detail Fatigue Life Improvement Techniques 08/26/1997
SSC-401 State of the Art in Hull Monitoring Systems 10/30/1997
SSC-402 Guide to Damage Tolerance Analysis of Marine Structures 10/30/1997
SSC-403 Design Guide for Marine Applications of Composites 12/01/1997
SSC-404 Ship Structural Integrity Information System (SSIS) Phase III Ship Quality Information System 09/30/1998
SSC-405 Fatigue Resistant Detail Design Guide for Ship Structures 03/31/1999
SSC-406 Sea Operational Profiles for Structural Reliability Assessments 05/30/1999
SSC-407 Optimal Strategies for the Inspection of Ships 07/05/1999
SSC-408 Detection Probability Assessment for Visual Inspection of Ships 07/05/1999
SSC-409 Guide to Damage Tolerance Analysis of Marine Structures 09/30/2000
SSC-410 Fatigue of Aluminum Structural Weldments 05/31/2000
SSC-411 Evaluation of the Effect of Construction Tolerances on Vessel Strength 07/31/2000
SSC-412 Interactive Nature of Cathodic Polarization and Fatigue 09/30/2000
SSC-413 Effect of Welded Stiffeners on Fatigue Crack Growth Rate 08/31/2000
SSC-414 Probability Based Design (Phase 4): Synthesis of Reliability Thrust Area 09/30/2000
SSC-415 Crack Arrest Toughness of Steel Weldments 09/30/2000
SSC-416 Risk-Based Life Cycle Management of Ship Structures 11/30/2001
SSC-417 Prediction of Structural Response in Grounding Application to Structural Design 11/30/2001
SSC-418 Compensation for Openings in Primary Ship Structure 09/30/2002
SSC-419 Supplemental Commercial Design Guidance for Fatigue 11/30/2001
SSC-420 Failure Definition for Structural Reliability Assessment 09/30/2002
SSC-421 Risk-Informed Inspection of Marine Vessels 09/30/2002
SSC-422 Modeling Structural Damage n Ship Collisions 09/30/2002
SSC-423 Green Water Loading on Ship Deck Structures 05/23/2003
SSC-424 Evaluation of Accidental Oil Spills From Bunker Tanks (Phase I) 05/23/2003
SSC-425 Fatigue Strength and Adequacy of Weld Repairs 08/18/2003
SSC-426 Post-Yield Stability of Framing 08/18/2003
SSC-427 Life Expectancy Assessment of Ship Structures 08/18/2003
SSC-428 In-Service Non-Destructive Evaluation of Fatigue and Fracture Properties for Ship Structures 08/15/2003
SSC-429 Rapid Stress Intensity Factor Solution Estimation for Ship Structure Applications 12/03/2003
SSC-430 Fracture Toughness of A Ship Structure 12/03/2003
SSC-431 Retention of Weld Metal Properties and Prevention of Hydrogen Cracking 12/03/2003
SSC-433 Interactive Buckling Testing of Stiffened Steel Plate Panels 07/13/2004
SSC-434 Predicting Motion, Structural Loads and Damage in Stranded Ships Phase I 07/13/2004
SSC-435 Predicting Stable Fatigue Crack Propagation in Stiffened Panels 07/13/2004
SSC-436 The Effect of Fabrication Tolerances on Fatigue Llife of Welded Joints 01/31/2005
SSC-437 Modeling Longitudinal Damage in Ship Collisions 01/31/2005
SSC-438 Structural Optimization for Conversion of Aluminum Car Ferry to Support Military Vehicle Payload 03/25/2005
SSC-439 Comparative Structural Requirements for High Speed Craft 05/01/2005
SSC-440 Deterioration of Structural Integrity Due to Chemical Treatment of Ballast Water 05/31/2005
SSC-441 FIRE DEGRADATION, FAILURE PREDICTION AND QUALIFICATION METHODS FOR FIBER COMPOSITES 09/15/2005
SSC-442 LABOR-SAVING PASSIVE FIRE PROTECTION SYSTEMS FOR ALUMINUM AND COMPOSITE CONSTRUCTION 09/15/2005
SSC-443 Design Guidelines for Doubler Plate Repairs of Ship Structures 08/22/2005
SSC-444 In-Service Non-Destructive Estimation of the Remaining Fatigue Life of Welded Joints 11/09/2005
SSC-445 Structural Survivability of Modern Liners 11/09/2005
SSC-446 Comparative Study of Naval and Commercial Ship Structure Design Standards 03/23/2007
SSC-447 Fatigue and Fracture Behavior of Fusion and Friction Stir Welded Aluminum Components 03/23/2007
SSC-448 Fracture Mechanics Characterization of Aluminum Alloys for Marine Structural Applications 03/23/2007
SSC-449 Hydrodynamic Pressure and Structural Loading of High-Speed Catamaran and SES 02/01/2008
SSC-450 Ship Structure Committee Impact Study 02/01/2008
SSC-451 Mechanical Collapse Testing on Aluminum Stiffened Panels for Marine Applications 02/01/2008
SSC-452-II Aluminum Marine Structure Design and Fabrication Guide-Appendix 02/01/2008
SSC-452 Aluminum Marine Structure Design and Fabrication Guide 02/01/2008
SSC-1996symp01 Introducing Human Factors Into the Marine Safety Environment 01/20/1997
SSC-1996symp02 Prevention Through People: A Strategy for Improving Safety into the Twenty-First Century 01/20/1997
SSC-1996symp03 Consideration of Human Organizational Factors in Development of Design, Construction, Maintenance Guidelines for Ship Structure 01/20/1997
SSC-1996symp05 The International Safety Management (ISM) Code, Is It Just A License to Trade 01/20/1997
SSC-1996symp07 Risk Analysis in Marine Structures 01/20/1997
SSC-1996symp08 A Decision Analysis Framework for Assessing Human Organizational Error in the Marine Industry 01/20/1997
SSC-1996symp12 An Approach to Improving Human Factors in Marine Maintenance 01/20/2007
SSC-1996symp09 Structural Design for Production: A Human Factors Viewpoint 01/20/1997
SSC-1996symp10 Factors Affecting Marine Inspection Performance 01/20/1997
SSC-1996symp11 Addressing Human Factors in Bulk Carrier Inspections and Repair 01/20/1997
SSC-1996symp13 Shiphandling in Storm Conditions 01/20/1997
SSC-1996symp14 Assuring Quality and Reliability of Ship Structures Finite Element Analysis 01/20/1997
SSC-1996symp15 Application of Human Factors Engineering Techniques for Assessing Impact of System Design on the User 01/20/1997
SSC-1996symp16 Design Approaches and Tools to Enhance Human Factors Engineering Design of Marine Systems 01/20/1997
SSC-1996symp18 Application of Hull Monitoring and ISIT Technology to Ship Safety and Operations 01/20/1997
SSC-1996symp06 Implementation of the ISM Code in a Government – Canada 01/20/1997
SSC-1996symp17 High Reliability Tanker Loading and Discharge Operations at Chevron Wharf, Richmond, CA 01/20/1997
SSC-2000symp09 Residual Strength of Damaged Ship Hull 01/20/2001
SSC-2000symp05 Total Ownership Cost Avoidance with Proper Use of 3-D Modeling and Simulation Tools for Human Machine Interactions 01/20/2001
SSC-2000symp01 Probabilistic Vulnerability Assessment Tool for Surface Ship Under Extreme Dynamic Loads Structures 01/20/2001
SSC-2000symp02 Reliability-Based Methodology for Life Prediction of Ship Structures 01/20/2001
SSC-2000symp03 Development of a Safety Management Assessment System for the International Safety Management Code 01/20/2001
SSC-2000symp04 Reliability-Based Structural Design of Ships Using Load and Resistance Factor Design Approach 01/20/2001
SSC-2000symp06 The Importance of the Human Element in Ship Design 01/20/2001
SSC-2000symp07 Managing Ship Structural Development 01/20/2001
SSC-2000symp08 Millennium Class Tanker Structural Design – From Owner Experience to Shipyard Launching Ways 01/20/2001
SSC-2000symp10 Rapid Prediction of Damage to Struck and Striking Vessels in a Collision Event 01/20/2001
SSC-2000symp12 Evaluation Method of Absorbed Energy in Collision of Ship with Anti-Collision Structure 01/20/2001
SSC-2000symp11 Optimal Risk Tanker (ORT): A Systematic Approach to a TAPS Tanker Design 01/20/2001
SSC-2000symp13 Prediction of Structural Response in Grounding – Application to Structural Design 01/20/2001
SSC-2000symp14 Wave Impact Reduction of Planing Boats 01/20/2001
SSC-2000symp17 Buffer Bow Design for the Improved Safety of Ships 01/20/2001
SSC-2000symp16 Acquisition of Line Heating Information for Automatic Plate Forming 01/20/2001
SSC-2000symp15 Development of a High-Speed Aluminum Ferry with Floating Frames 01/20/2001
SSC-2007symp11 Hydrodynamic Pressure and Structural Loading of High-Speed Catamaran and SES 12/21/2007
SSC-2007symp01 Mechanical Collapse Testing on Aluminum Stiffened Plate Structures for Marine Applications 12/21/2007
SSC-2007symp02 Improving Fatigue Life for Aluminum Cruciform Joints by Weld Toe Grinding 12/21/2007
SSC-2007symp03 Welding Distortion Analysis of Hull Blocks using Equivalent Load Method Based on Inhereent 12/21/2007
SSC-2007symp04 The Impact of Welds on the Ultimate Strength of Aluminum Structures 12/21/2007
SSC-2007symp08 A Method for the Quantitative Assessment of Performance of Alternative Designs in the Accidental Condition 12/21/2007
SSC-2007symp05 Ultimate Strength of Frames and Grillages Subject to Lateral Loads – An Experimental Study 12/21/2007
SSC-2007symp06 Research Needs in Aluminum Structures 12/21/2007
SSC-2007symp07 New Directions in Ship Structural Regulations 12/21/2007
SSC-2007symp12 Recent Hydrodynamic Tool Development and Validation for Motions and Slam Loads on Ocean-Going High Speed Vessels 12/21/2007
SSC-2007symp10 Design of X-joints in Sandwich Structures for Naval Vessels 12/21/2007
SSC-2007symp09 Extreme Waves and Ship Design 12/21/2007

Gửi phản hồi

Mời bạn điền thông tin vào ô dưới đây hoặc kích vào một biểu tượng để đăng nhập:

WordPress.com Logo

Bạn đang bình luận bằng tài khoản WordPress.com Log Out / Thay đổi )

Twitter picture

Bạn đang bình luận bằng tài khoản Twitter Log Out / Thay đổi )

Facebook photo

Bạn đang bình luận bằng tài khoản Facebook Log Out / Thay đổi )

Google+ photo

Bạn đang bình luận bằng tài khoản Google+ Log Out / Thay đổi )

Connecting to %s